EFS4000 Heavy Duty Lake Fountain 40' x 40' sprays

         PLEASE CALL 1-800-351-8814 to order the EFS4000 UNLIGHTED FOUNTAIN

The EFS-4000 is our biggest unlighted fountain providing a very large 40'H x 40'W fountain display. The EFS-4000 design is built upon using a combination of 4 each 1hp stainless steel submersible trash pumps mounted on a single float platform. Our EFS-4000 fountain is intended for use in natural and man made retention ponds from 3 to 6+ acres where maximum visibility and water aeration is required. The EFS-4000 is available in 230 volt, single phase hookup only. The EFS-4000 fountain comes 100% assembled and is ready to install and operate right off the shipping skid.

The EFS-4000 is comparable to other manufacturers $10,000+ fountains in the same size range. It's important to remember that on pond fountains the pumps do all the hard work so focus on getting the best quality pump you can find within your budget and for your application. The way we see it your fountain experience should be nothing but a pleasure and with an Eagle Fountain that's exactly what it will be.

EFS4000 pumps:

The EFS-4000 is supplied with 4 each 1hp, 230v, 1ph stainless steel submersible trash pumps. Our stainless trash pumps have 3 sets of seals instead of 1 set of seals like ordinary clean water pumps have. The 2 sets of internal silicon carbide face seals and 1 outboard set of lip seals is why the pumps last so long. Our stainless trash pumps are definitely not the cheapest pumps out there but they are likely the best pumps being supplied on any dirty water retention pond fountain available today.

EFS4000 Spray Heads:

The EFS-4000 includes 2 complete sets of spray heads.

Additional underwater service cord:

Additional service cord is available on the EFS-4000 up to a max of 200', see details below.

Optional GFCI Breaker Package:

You can add a 40 amp GFCI protected service disconnect option for the EFS-4000 at an additional charge of $260 by selecting YES for the GFCI.

EFS4000 General Features:

Our EFS-4000 severe duty fountain is for lakes and big ponds from 3 to 6+ acres. The fountain has a spray size of 40'H X 40'W sprays in a 3 tiered, fan-jet or trumpet pattern and is built using 4 each 1hp, 230 volt, 1ph, 60hz stainless steel trash pumps rated at a combined total of 360GPM. The EFS-4000 fountain is available only in a 230 volt model and it is rated 21FLA. One 230 volt single phase power service hookup is required, rated for 30 amps. The EFS-4000 is designed for severe duty applications in retention, drainage or newly dug ponds where sand & debris concentrations are high. The stainless trash pumps we use contain two sets of silicon carbide face seals and an outboard set of lip seals, 3 sets of seals total, for the ultimate in service life when operating in dirty or sandy water conditions. The EFS-3000 is a big impressive fountain and it is built using only Industrial grade components which will be beyond your expectations. The EFS-4000 is comparable to other manufacturers $10,000 fountains in the same size range. The fountain comes 100% assembled and all you do is float it and drop 2 anchors where you want it to stay, hook up the power and you're done. Installation for this fountain takes less than an hour and no special tools are needed. The EFS-4000 fountain is shipped by freight carrier, fully assembled and it weighs approx 320lbs. The EFS-4000 requires a minimum water depth of at least 48" at all times to operate. The EFS-4000 comes standard with 150' underwater service cord, 8 circuit Intermatic control panel, 3 sets of spray heads, float platform and bottom plate protector. Everything you need is included and the only modification available for this fountain is to extend the cord length if required.

Additional cord is available up to a max of 250'. (Additional service cord price may fluctuate for this fountain due to changing market copper prices.) Please call to order this fountain with extra service cord length. UPS Freight is additional. Shipping weight is approx 320 lbs.

If you have questions or need more info call Bill at 800-351-8814 to discuss your application.